It won't turn on at all
Nothing happens at the timer or controller. This can be power, the timer or automation, or the motor itself.
Repair / Pool pumps
If your pool pump stopped working, hums but won't spin, keeps losing prime or is leaking, Blueviel can find out why and tell you whether it's worth repairing or should be replaced. Our certified technicians repair and replace pool pumps across Miami-Dade, Hollywood and Hallandale Beach, and you get a free written estimate before any work. Call (888) 401-7133.
Start here
Blueviel has cared for Miami pools for 5+ years and has 470+ reviews from local pool owners. Our CPO-certified technicians are licensed, and every repair starts with a free estimate.
01 / The symptoms
These are the problems pool owners describe to us most often.
Nothing happens at the timer or controller. This can be power, the timer or automation, or the motor itself.
Often a failed start capacitor, a seized motor shaft or a jammed impeller. Switch it off at the breaker so the motor doesn't overheat.
Usually an air leak on the suction side: a cracked or loose lid, a worn lid O-ring, a loose drain plug or a water level too low for the skimmer.
Loud running noise usually points to worn motor bearings or debris in the impeller.
A drip between the motor and the pump body is usually a worn shaft seal. Fixed early, it protects the motor.
Overheating, a wiring problem or a failing motor. Leave it off and have it checked.
02 / The work
We check the whole pump and how it connects to the rest of your system before recommending anything.
Diagnose the motor, capacitor, impeller, shaft seal, lid and O-rings
Replace shaft seals, capacitors, lids, O-rings and baskets
Clear jammed impellers and fix suction-side air leaks
Repair or replace unions and fittings at the pump
Replace failed motors where that's the better value
Replace the whole pump with one sized to your pool and plumbing
Set the run schedule so the pool is filtered without running longer than it needs to
We work on major pool equipment brands, such as Jandy, Pentair, Rheem and Gulfstream.
03 / Good question
The most common causes are a power or timer problem, a failed capacitor or motor, a clog in the skimmer basket, pump basket or impeller, or a water level too low for the skimmer to feed the pump.
Safe things to check yourself: make sure the breaker is on and the timer or automation is set to run, empty the skimmer and pump baskets, and top the water up to the middle of the skimmer opening. Don't open the motor or touch the wiring. If it still won't run, call us.
04 / Good question
Often, yes. Shaft seals, capacitors, impellers, lids and O-rings can all be replaced without changing the pump. When the motor itself has failed on an older pump, a new pump is often better value than a new motor. We'll show you both options in a written estimate.
For more detail, read pool pump repair in Miami: common problems and fixes.
05 / Good question
Physically swapping a pump isn't the hard part. Getting it right is: the new pump has to match your pool size, plumbing and filter, and it has to be wired correctly for an outdoor, wet location. A mis-wired connection or an over-tightened union is a common way a simple swap turns into a bigger repair, which is why most owners have a technician do it.
06 / Good question
It depends on the type of pump (single-speed or variable-speed), its size and whether the plumbing or wiring needs changes. We quote after we've seen your equipment. Your estimate is free, and it's in writing before we start.
07 / Good question
There's no set schedule. A pump is due for replacement when the motor fails or when repairs start to cost close to what a new pump would. Miami pools run all year, and salt air near the coast adds wear, so regular checks help a pump last.
If you're replacing anyway, a variable-speed pump can run at lower speeds for most of the day and usually uses less energy than a single-speed pump. Our guide to variable-speed pool pumps explains the trade-offs.
Where we work
We repair pool equipment across Miami-Dade from three offices: Miami Beach (350 Lincoln Rd), Miami (1555 NW 28th St) and Coconut Grove (3390 Mary St #116). We also serve Hollywood Beach and Hallandale Beach to the north.
How to book
Four steps from first call to working equipment.
Call (888) 401-7133 or request a free estimate online with your name, phone, the service you need and your address or ZIP. A photo of your equipment pad or any error code on the display helps us come prepared. We take calls and quote requests 7AM–7PM daily.
A technician comes out, checks the equipment and finds the cause, not just the symptom. We'll schedule a visit as soon as possible, depending on your needs.
Simple fixes are quoted on the spot and can often be done the same visit. Bigger repairs and replacements come with a free written estimate that compares the cost of fixing what you have with replacing it, so you can decide before we start.
Once you approve, we make the repair, run the system and check that everything is working together: pump, filter, heater and controls.
The finer details / FAQ
Common questions from Miami pool owners
A humming pump that won't spin often has a failed start capacitor, a seized motor shaft or a jammed impeller. Turn it off at the breaker so the motor doesn't overheat, and have a technician test it.
Air in the pump basket usually means a suction-side air leak, such as a cracked or loose lid, a worn lid O-ring, a loose drain plug or a water level too low for the skimmer.
Usually. A leak between the motor and the pump body is most often a worn shaft seal, which can be replaced. Fixing it early helps protect the motor from water damage.
If it's a seal, capacitor, lid or impeller, repair is usually worth it. If the motor has failed on an older pump, replacement is often the better value. We compare both in a written estimate.
For many Miami pools, yes, because pumps run year-round and a variable-speed pump can run at lower speeds for most of the day. We'll tell you whether it suits your pool and plumbing.
It depends on the situation. Simple fixes can often be done the same visit. If the pump needs replacing, we explain your options, and once you approve we schedule the install as soon as possible.
Related services
Free estimate
Tell us what your pump is doing and a certified technician will find the cause and quote the fix before any work.